Virnig V60 60-Inch Snow Blade for Skid Steers🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on virnig.com →
Overview
The Virnig V60 60-inch angle snow blade clears driveways, farm yards, and acreages on compact skid steers. Hydraulic angle adjusts ±30° from the cab with ±4° of side-to-side oscillation to follow uneven surfaces. A 5/8"×8" bolt-on cutting edge is field-replaceable. Requires a loader capacity over 1,500 lbs and standard hydraulic flow. Two hydraulic cylinders deliver full angle control without mechanical stops. Thicker moldboard steel than the V50 light-duty series. Made in Minnesota and available in Canada through Virnig's dealer network.
Canada Availability
Available in Canada through Virnig's Canadian dealer network.
Key Facts
- Working width: 60 inches
- Angle: hydraulic
- Application: farm yards, acreages
- Mount: universal SSQA
- Weight: 250–750 lbs
- Hydraulic flow: 10–15 GPM
✅ Specs sourced from virnig.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
- Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
- You want hydraulic angle adjustment from the cab without stopping to reposition
⛔ Skip if…
- You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
- Budget is tight and your site is obstacle-free — a straight blade costs less and works fine
🔍 Also consider…
- Straight snow blade if your sites are flat and obstacle-free
- Box snow pusher for high-volume commercial lot clearing
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
⚠ Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/virnig-v60-snow-blade-60/
