Virnig V60 84-Inch Skid Steer Snow Blade🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on virnigmfg.com →
Overview
Virnig's V60 84-inch snow blade is a heavy-duty hydraulic angle blade for full-size skid steers working Canadian commercial and farm snow removal. Virnig's construction standard applies here — heavy plate steel, quality cylinders, and a durable cutting edge system. Ships to Canada through authorized North American dealers. A well-built blade for operators who want reliability across long winter service seasons.
Canada Availability
Virnig attachments ship to Canada and are available through authorized North American dealers.
Key Facts
- Working width: 84 inches
- Brand: Virnig Manufacturing
- Type: hydraulic angle snow blade
- Application: commercial lots, farm yards, snow clearing
- Compatible: full-size skid steers with SSQA mount
- Weight: 350–1050 lbs
- Hydraulic flow: 10–15 GPM
Is This Right For You?
✅ Buy if…
- You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
- Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
- You want hydraulic angle adjustment from the cab without stopping to reposition
⛔ Skip if…
- You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
- Budget is tight and your site is obstacle-free — a straight blade costs less and works fine
🔍 Also consider…
- Straight snow blade if your sites are flat and obstacle-free
- Box snow pusher for high-volume commercial lot clearing
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Virnig in Canada
Virnig Manufacturing is a Minnesota-based producer known for consistent build quality and a wide model range. Their attachments ship to Canadian dealers regularly and are a common sight on Western and Prairie job sites.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
⚠ Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/virnig-v60-snow-blade-84/
