Erskine 72-Inch Angle Broom for Skid Steers🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
✓ Fits most skid steers, including small-frame
View on erskine-attachments.com →
Overview
Erskine is a Minnesota-based attachment manufacturer with a solid Canadian dealer presence. Their 72-inch hydraulic angle broom sweeps construction debris, gravel, and light material from paved surfaces on mid-frame skid steers. The hydraulic angle adjusts from the cab for efficient side-casting without dismounting. Suited to construction site cleanup, parking lot maintenance, and municipal sweeping contracts. Bristle rotation and angle are both hydraulically controlled for operator convenience. A reliable mid-tier brand available through Erskine's Canadian dealer network.
Canada Availability
Available in Canada through Erskine dealers.
Key Facts
- Working width: 72 inches
- Type: hydraulic angle broom
- Application: construction sites, municipal sweeping
- Mount: universal SSQA
- Weight: 300–900 lbs
- Hydraulic flow: 15–25 GPM
Is This Right For You?
✅ Buy if…
- You clean up debris, sand, and small material from hard surfaces like concrete, asphalt, or warehouse floors
- Spring road sand cleanup in Canadian parking lots is a core task for your machine
⛔ Skip if…
- You need to collect the material, not just move it — an angle broom side-casts debris into a windrow
- Fine dust or regulated material (silica) requires containment — an angle broom disperses it
🔍 Also consider…
- Pickup broom if you need to collect material rather than side-cast it
- Street sweeper or vacuum attachment if dust control is a regulatory requirement
🔧 Machine Compatibility
Compatible with all skid steer brands and compact track loaders via universal SSQA quick attach. Mid to large-frame machines (S450–S750 class) are the best fit for this width.
About Erskine in Canada
Erskine is a US attachment brand with Canadian dealer coverage, known particularly for augers, soil conditioners, and specialty attachments. Erskine products are available at equipment dealers across Canada and are respected for quality build and reliable performance.
Care & Maintenance
- Inspect broom fill length after every 20 hours of use — bristles below minimum length drag rather than sweep, waste time, and mask the fact that you need a replacement
- Clean debris wrapped in the drum core after every extended session — wire, hair, and root cause drum imbalance and stress the hydraulic motor bearings
- Grease drum bearing end caps monthly during active use periods
- Check hydraulic motor connections and angle cylinder fittings weekly — broom motors work hard and connection fittings loosen over time
- Store on end or off the ground so bristle fill doesn't take a permanent set under drum weight — brooms stored drum-down develop flat spots in the fill that affect sweep quality
How to Connect
- Attach broom frame using Bob-Tach
- Connect hydraulic couplers for rotation motor
- Verify rotation direction (forward-sweep or reverse-sweep per job)
- Adjust broom angle if applicable — most have manual tilt adjust
⚠ Safety NoteBrooms are typically standard-flow (10-18 GPM). Angle brooms can swivel — set angle before engaging rotation.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/brooms/erskine-angle-broom-72/
.jpg)
