Langner 750LE Skid Steer Post Driver🔵 Mid
🟢 Standard Flow
⚠ High-flow machine required
✓ Compatible with high-flow CTL
⚠ Borderline for small-frame machines — verify ROC
✓ Fits most mid-frame skid steers & CTLs
View on langnerequipment.ca →
Overview
Langner Equipment manufactures their own line of skid steer post drivers in Canada. The 750LE is a 750 ft-lb energy class driver operating at 15–25 GPM, weighing 1,380 lbs, and delivering up to 900 beats per minute. Priced at $7,500 CAD through Langner Equipment. Comes with plumb/post remover chain, nitrogen bottle, tool kit, and fill kit. An optional tilt kit is available. Used widely on Canadian fencing and utility installation projects.
Canada Availability
Canadian-manufactured by Langner Equipment. Available direct from Langner Equipment at $7,500 CAD.
Key Facts
- Model: 750LE
- Energy class: 750 ft-lb
- Hydraulic flow: 15–25 GPM
- Operating weight: 1,380 lbs
- Maximum beats per minute: 900
- Included: plumb/post remover chain, nitrogen bottle, tool kit, fill kit
- Optional tilt kit: $2,990
- SSQA skid steer quick attach
Is This Right For You?
✅ Buy if…
- You push material forward in a straight line: stockpile cleanup, rough site clearing, or road building
- You need basic grading on unpaved surfaces and already own or operate a skid steer
⛔ Skip if…
- Angle control or cast direction matters — a 4-way or 6-way blade is worth the upgrade for that work
- Finish grading is your goal — a box blade or land plane gives you far more control of the final surface
🔍 Also consider…
- 4-way or 6-way dozer blade if you need angle control
- Box blade or land plane if finish grading is the primary task
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Langner Equipment in Canada
Langner Equipment is a Canadian dealer and supplier of specialty skid steer attachments including gravel spoon buckets and other niche tools. As a Canadian operation, they offer direct supply to contractors looking for domestic availability on hard-to-find attachment types.
Care & Maintenance
- Grease all hydraulic cylinder pin fittings before every use session — dry pins accelerate wear in the cylinder bores and cause premature side-loading
- Inspect the cutting edge for wear or deformation after hard use — replace bolt-on edges when worn to avoid transferring impact to the blade frame
- Check hydraulic coupler connections for leaks weekly — dozer blade circuits cycle frequently and coupler seals wear faster than on less-cycled attachments
- Inspect tilt and angle cylinder rod seals for leaks after use in abrasive or sandy soil — grit scoring a rod seal causes accelerating internal leakage
- Clean the blade face and frame before storage — mud pockets hold moisture against bare steel and cause rust pitting during off-season storage
How to Connect
- Attach blade frame to Bob-Tach
- If 6-way blade: connect tilt and angle hydraulic circuits (both sides)
- Test all blade movements (up/down, tilt left/right, angle) before working
⚠ Safety NoteSome dozer blades have hydraulic float position — engage float for finish grading
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
More from Langner Equipment
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/dozer-blades/langner-750le-post-driver/
