Metal Pless 72-Inch Live Edge Carbide Snow Blade⭐ Premium
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on metalpless.com →
Overview
Metal Pless's 6-11 Live Edge carbide blade is described by Langner Equipment as the premium snow blade on the market. The patented Live Edge technology allows the moldboard to flex and conform to surface imperfections for full scraping contact on every pass. Available in 72-inch and wider sizes through Langner Equipment in Canada at approximately $22,900 CAD. Metal Pless is a Quebec-based Canadian manufacturer.
Canada Availability
Canadian-manufactured by Metal Pless (Quebec). Available through Langner Equipment at approximately $22,900 CAD for the 6-11 LE model (includes hoses, couplers, and harness for most machines).
Key Facts
- Working width: 72 inches (6-11 LE model)
- Type: Live Edge carbide snow blade
- Live Edge: flexes to follow surface imperfections
- Cutting edge: carbide for hard ice and packed snow
- Includes: hoses, couplers, harness (not Bobcat)
- Canadian-manufactured by Metal Pless
- SSQA universal quick attach
- Weight: 300–900 lbs
- Hydraulic flow: N/A - passive attachment
Is This Right For You?
✅ Buy if…
- You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
- Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
- You want hydraulic angle adjustment from the cab without stopping to reposition
⛔ Skip if…
- You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
- Budget is tight and your site is obstacle-free — a straight blade costs less and works fine
🔍 Also consider…
- Straight snow blade if your sites are flat and obstacle-free
- Box snow pusher for high-volume commercial lot clearing
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Metal Pless in Canada
Metal Pless is a Quebec manufacturer specializing in snow management equipment. Their snow blades, pushers, and winter maintenance products are designed specifically for Canadian conditions — heavy wet snow, freeze-thaw cycles, and the kind of winter that other brands' products weren't designed for. Metal Pless has a strong following among Canadian snow contractors.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
⚠ Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/metal-pless-le-snow-blade-72/
