Skid Pro 96-Inch V-Blade Snow Plow🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on skidpro.com →
Overview
Skid Pro's V-blade snow plow splits and directs snow to both sides simultaneously, allowing faster clearing on open drives and roads compared to a straight angle blade. The V position breaks heavy packed snow banks cleanly. Available in multiple widths for mid and large-frame skid steers. Skid Pro ships to Canada and the V-blade is used by Canadian commercial snow contractors working on roads and open areas.
Canada Availability
Ships to Canada direct from Skid Pro. Used by Canadian commercial snow operators on roads and large open areas.
Key Facts
- Working width: 96 inches
- Type: V-blade / V-plow
- Position modes: V, straight, angled
- Application: roads, wide driveways, commercial lots
- SSQA universal quick attach
- Weight: 400–1200 lbs
- Hydraulic flow: 10–15 GPM
✅ Specs sourced from skidpro.com · Last verified: March 2026
Is This Right For You?
✅ Buy if…
- You clear roads, laneways, or driveways and need to angle snow to one side or split it to both
- Wind-row control matters more than containment — V-blades cut through packed snow cleanly
- You do both pushing and angling in a single pass, reducing total machine time
⛔ Skip if…
- Containment is critical — V-blades let snow escape the sides, requiring multiple clean-up passes
- Commercial flat-lot clearing is your primary use — a box pusher covers more ground per pass
🔍 Also consider…
- Straight snow blade for flat lots where angle control isn't needed
- Box snow pusher for parking lots and loading dock clearing
🔧 Machine Compatibility
Wide attachment — verify your machine's rated operating capacity (ROC) before ordering. Compatible with all skid steer brands via universal SSQA quick attach — no auxiliary hydraulics required.
About Skid Pro in Canada
Skid Pro manufactures attachments in the USA and has a strong Canadian distribution footprint. Their catalog covers most common attachment types with a focus on durability and value for everyday contractor use.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
⚠ Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/skid-pro-v-blade-96/
