Erskine 84-Inch Hydraulic Snow Blade for Skid Steers🔵 Mid
🟢 Standard Flow
✓ Runs on standard auxiliary flow
✓ Fits most skid steers, including small-frame
View on erskine-attachments.com →
Overview
Erskine's 84-inch hydraulic angle snow blade is a wide-format clearing blade for mid-frame to large-frame skid steers on commercial and farm snow removal. The hydraulic angle adjusts from the cab for efficient side-casting and precise windrow placement. At 84 inches, this blade covers more ground per pass than the 72-inch model — practical for commercial lots, farm yards, and acreage driveways with heavy Canadian snowfall. Built to Erskine's heavy-gauge standards. Available through Erskine dealers across Canada.
Canada Availability
Available in Canada through Erskine dealers.
Key Facts
- Working width: 84 inches
- Angle: hydraulic
- Application: commercial, farm yards, acreages
- Mount: universal SSQA
- Weight: 350–1050 lbs
- Hydraulic flow: 10–15 GPM
Is This Right For You?
✅ Buy if…
- You clear laneways, farm roads, or municipal paths where you need to cast snow to one side
- Your site has curbs or obstacles — trip-edge protection prevents costly blade and pin damage
- You want hydraulic angle adjustment from the cab without stopping to reposition
⛔ Skip if…
- You're clearing open lots — a box pusher or straight blade is more efficient for pure containment
- Budget is tight and your site is obstacle-free — a straight blade costs less and works fine
🔍 Also consider…
- Straight snow blade if your sites are flat and obstacle-free
- Box snow pusher for high-volume commercial lot clearing
🔧 Machine Compatibility
Compatible with all skid steer brands via universal SSQA quick attach. No auxiliary hydraulics required — operates off the loader arms.
About Erskine in Canada
Erskine is a US attachment brand with Canadian dealer coverage, known particularly for augers, soil conditioners, and specialty attachments. Erskine products are available at equipment dealers across Canada and are respected for quality build and reliable performance.
Care & Maintenance
- Grease all cylinder pin fittings and pivot points before each snow season — cold temperature makes inadequately lubricated joints seize
- Inspect the cutting edge for wear and replace before it's worn through to the blade frame — a thinned edge transfers frost heave impacts directly to the frame and coupler
- Rinse salt off the blade after every use and before any storage period longer than a week — salt attack on bare steel is measurably faster than most operators expect
- Inspect hydraulic angle cylinder hoses before each season and replace any cracked or weathered hoses — cold-hardened hoses split at the worst moment
- Store in a dry location with the cutting edge off wet ground — standing water under a stored blade rusts the edge from below and weakens it before the next season
How to Connect
- Attach blade frame using Bob-Tach
- Connect hydraulic tilt circuit if equipped (many are fixed or manual angle)
- Check trip edge spring tension before working — critical for road/pavement use
⚠ Safety NoteTrip edge is a safety feature — it releases on hidden obstacles. Replace worn trip edge springs annually.
Ready to Buy in Canada?
Pricing varies by region and dealer stock levels change seasonally. For current availability and a real quote, contact a local dealer.
Find a Dealer Near You →
Complete the job — you might also need:
✅ Last checked: March 2026
Source: skidsteerattachments.ca/catalog/snow-blades/erskine-snow-blade-84/
